Purolite Resin

Purolite resin has several product and plant approvals including ISO, NSF, WRAS, GMP and FDA certifications. While ordinary commercial styrene-based sulphonic acid resins may often be used for chemical reactions catalysed by the H+ or M+ ions, faster process times, better yields and higher product purity may be obtained by using a properly designed and purified catalyst. Purolite catalyst resins are supplied either completely water-swollen, or dried to specification.

Specification 

1.     HP: 0-14

2.     Temperature :Na≤120, H ≤100 

3.     Expansibility%: NA+ to H+:≤10 

4.     Industrial use resin layer height m:≥1.0 

5.     Regeneration density%:NACL6-10 HCL5-10 H2SO4:2-4 

6.     Regeneration dosage kg/m3:NACL 75-150 HCL 40-100 H2SO4:75-150 

7.     Regeneration fluid flow velocity m/h:5-8 

8.     Reflection time: minute:30-60 

9.     Washing velocity: m/h:10-20 

10.  Operating time: minute:30 

11.  Operating velocity:  m/h:10-40 

12.  Exchange capacity: salt≥1000 hydrochloric acid≥1500